Currently, Lemo USA only stocks one orientation of their 90 degree connectors, which we call "standard" 90 degree Lemo connectors. These connectors are usually easy to get in a short amount of time. Standard 90 degree Lemo connectors always bend away from the red marker on the connector shell, as seen in the photo below:
Can I get a Lemo connector that bends in a different direction?
Lemo has recently started shipping a new connector that can be assembled in different clock positions allowing the cable to exit in one of eight directions. We are doing our best to keep these items stocked, and we will be updating the website to allow the new 90 degree connectors to be chosen as an option on various product pages.
Lemo's new Anglissimo connector can be assembled in eight orientations. The red dot represents the keyway and aligns with the red dot on the Lemo jack. Position "5" on the diagram is the way a standard 90 degree Lemo is assembled; away from the keyway. The view shown is of the back of the plug.
There is currently an added lead time for these assignable clock-position connectors, so if you would like to enquire about their current lead time, please contact us.
Are there any other ways to reorient a 90 degree Lemo connector on my device?
Some devices are designed in such a way that the Lemo jack can be reoriented to allow the cable to exit in a different direction. Some manufacturers will make the modification for you, but if they cannot or will not, Media Blackout might be able to make the modification for you.